|
|
Establishment of a Fast Quality Assurance Method for Three-dimensional Afterloading Treatment Plan |
JI Tian-long, ZHAO Jing, SHEN Hao, LI Guang |
Department of Radiotherapy, the First Affiliated Hospital of China Medical University, Shenyang 100001, China |
|
|
Abstract Objective: To study the correlation between tumor size, radiation source intensity, prescription dose, and source dwell time in afterloading treatment plan, and to establish a rapid quality control method for afterloading treatment plan. Methods: A total of 181 patients with gynecological tumor were enrolled in our hospital. A total of 84 patients were installed with three tubes of Fletcher' applicator, 58 patients with single uterine tube and 39 patients with vaginal applicator. Each patient was scanned with CT before treatment, and the target area and organs were delineated by doctors. The treatment plan was optimized by IPSA. The planned source intensity, prescription dose, source residence time and tumor volume of each case were recorded and the CI, RV, and k value were calculated, The CI distribution characteristics and the relationship with RV value were analyzed. In addition, 46 cases of gynecological tumor patients' afterloading plan used this method for quality control verification. Results: The CI of the three kinds of applicators was normal distribution. The average Ci of Fletcher applicator was 0.720±0.067, k=1394, r=0.894, the average CI of Fletcher applicator was 0.697±0.076, k=1428, r=0.940, the average CI of vaginal applicator was 0.742±0.067, k=1362, r=0.909. Conclusion: Using this method, we could quickly evaluate the target volume, radiation source intensity, prescription dose and treatment time, to determine the cause of deviation according to the feedback results, ensuring that the afterloading treatment plan can be implemented efficiently quickly, and accurately in accordance with the clinical requirements.
|
Received: 05 July 2019
|
|
Corresponding Authors:
JI Tian-long. E-mail: 18040095029@163.com
|
|
|
|
[1] Erickson BA, Bittner NH, Chadha M, et al.The American college of radiology and the american brachytherapy society practice parameter for the performance of radionuclide-based high-dose-rate brachytherapy[J]. Brachytherapy, 2017, 16(1):75-84. [2] Harkenrider MM, Alite F, Silva SR, et al.Image-based brachytherapy for the treatment of cervical cancer[J]. Int J Radiat Oncol Biol Phys, 2015,92(4):921-934. [3] Mazeron R, Castelnau-Marchand P, Escande A, et al.Tumor dose-volume response in image-guided adaptive brachytherapy for cervical cancer: A meta-regression analysis[J]. Brachytherapy, 2016,15(5):537-542. [4] Soliman AS, Owrangi A, Ravi A, et al.Metal artefacts in MRI-guided brachytherapy of cervical cancer[J]. J Contemp Brachyther, 2016,8(4):363-369. [5] Derks K, Steenhuijsen J, van den Berg HA, et al. Impact of brachytherapy technique (2D versus 3D) on outcome following radiotherapy of cervical cancer[J]. J Contemp Brachytherapy,2018,10(1):17-25. [6] Liu Z, Liang H, Wang X, et al.Comparison of graphical optimization or IPSA for improving brachytheraphy plans associated with inadequate target coverage for cervical cancer[J]. Sci Rep,2017,7(1):16423. [7] Ribeiro I, Janssen H, De Brabandere M, et al.Long term experience with 3D image guided brachytherapy and clinical outcome in cervical cancer patients[J]. Radiother Oncol,2016,120(3):447-454. [8] Lee S, Rodney E, Traughber B, et al.Evaluation of interfractional variation of organs and displacement of catheters during high-dose-rate interstitial brachytherapy for gynecologic malignancies[J]. Brachytherapy, 2017,16(6):1192-1198. [9] Pinnaduwage DS, Cunha JA, Weinberg V, et al.A dosimetric evaluation of using a single treatment plan for multiple treatment fractions within a given applicator insertion in gynecologic brachytherapy[J]. Brachytherapy, 2013,12(5):487-494. [10] Das RK, Bradley KA, Nelson IA, et al.Quality assurance of treatment plans for interstitial and intracavitary high-dose-rate brachytherapy[J]. Brachytherapy, 2006,5(1):56-60. [11] Smith RL, Panettieri V, Lancaster C, et al.The influence of the dwell time deviation constraint (DTDC) parameter on dosimetry with IPSA optimisation for HDR prostate brachytherapy[J]. Australas Phys Eng Sci Med, 2015,38(1):55-61. [12] Wang XL, Wu JX, Yuan K, et al.Analysis of dose effect of residence point weight standard deviation and uncertainty of source location on patients with cervical cancer[J]. Chin J Radiat Oncol, 2017,26(4):419-422. [13] Pelagade S, Maddirala HR, Misra R, et al.Dosimetric comparison of volume-based and inverse planning simulated annealing-based dose optimizations for high-dose rate brachytherapy[J]. Med Dosim, 2015,40(3):235-239. [14] Kannan RA, Gururajachar JM, Ponni A, et al.Comparison of manual and inverse optimisation techniques in high dose rate intracavitary brachytherapy of cervical cancer: A dosimetric study[J]. Rep Pract Oncol Radiother, 2015,20(5):365-369. [15] Ji TL, Zhao J, Li Q, et al.Analysis of the influence of residence time deviation restriction parameters on three-dimensional afterloading plan[J]. Chin J Med Phys, 2018,35(8):900-904. [16] Nkiwane KS,Andersen E, Champoudry J, et al.Total reference air kerma can accurately predict isodose surface volumes in cervix cancer brachytherapy.A multicenter study[J]. Brachytherapy, 2017,16(6):1184-1191. [17] Terribilini D, Vitzthum V, Volken W, et al.Performance evaluation of a collapsed cone dose calculation algorithm for HDR Ir-192 of APBI treatments[J]. Med Phys, 2017,44(10):5475-5485. [18] Carrara M, Cutajar D, Alnaghy S, et al.Semiconductor real-time quality assurance dosimetry in brachytherapy[J]. Brachytherapy, 2018,17(1):133-145. |
[1] |
Li Baoming, Hu Jiarui, Xu Haijun, Wang Cong, Jiang Yanni, Zhang Zhihong, Xu Jun. Deep Cascaded Network for Automated Detection of Cancer MetastasisRegion from Whole Slide Image of Breast Lymph Node[J]. Chinese Journal of Biomedical Engineering, 2020, 39(3): 257-264. |
[2] |
Xu Jie, Wang Xunheng, Li Lihua. Investigating Brain Networks for ADHD Children Based on Phase Synchronization of Resting State fMRI[J]. Chinese Journal of Biomedical Engineering, 2020, 39(3): 265-270. |
|
|
|
|