|
|
|
| Development and tests of large-scale inclined direct shear apparatus |
| SHI Jian-yong1, 2, QIAN Xue-de 1, 2, 3, ZHU Bao-kun1, 2 |
| 1. MOE Key Laboratory of Geomechanics and Embankment Engineering, Hohai University, Nanjing 210098, China; 2. Geotechnical Research Institute, Hohai University, Nanjing 210098, China; 3. Michigan Department of Environmental Quality, Lansing 48933, USA |
|
|
|
|
Abstract The shearing status for the landfill liner system located on the slope is different from that located on the bottom floor. A large-diameter inclined direct shear apparatus is designed to simulate liner shearing on various slopes. The comparative tests between the inclined and traditional direct shear apparatuses are conducted using the standard sand and the selected clay. It is found that both the displacement behavior and the shear strength of the standard sand and the selected clay obtained from the inclined and traditional direct shear tests are basically the same. More inclined shear tests are conducted for a composite liner interface between smooth HDPE geomembrane and compacted clay. All curves of the ratio of shear to normal stresses vs. the displacement under various vertical pressures show strain-softening behavior in the inclined shear test. The advantage of the inclined shear test is that more detailed shearing characteristics regarding changes of the normal and shear stresses on the shearing plane and the ratio of the shear to normal stresses can be investigated.
|
|
Received: 10 April 2012
|
|
|
|
|
|
[1] MULLER W, JAKOB I, SEEGER S,et al. Long-term shear strength of geosynthetic clay liners[J]. Geotextiles and Geomembranes, 2008,262:130-144.
[2] 张建民,侯文峻,张 嘎,等. 大型三维土与结构接触面试验机的研制与应用[J]. 岩土工程学报, 2008,306:889-894. ZHANG Jian-min, HOU Wen-jun, ZHANG Ga, et al. Development and application of 3D soil-structure interface test apparatus[J]. Chinese Journal of Geotechnical Engineering, 2008, 306
[3] 张 嘎,张建民. 大型土与结构接触面循环加载剪切仪的研制及应用[J]. 岩土工程学报, 2003,252:149-153. ZHANG Ga, ZHANG Jian-min.
Development and application of cyclic shear apparatus for soil-structure interface[J]. Chinese Journal of Geotechnical Engineering, 2003, 252: 149-153. (in Chinese)
[4] ZHANG G, ZHANG J M. Large-scale apparatus for monotonic and cyclic soil-structure interface test[J]. Geotechnical Testing Journal, 2006,295:401-408.
[5] 李邵军,孟凡震,陈 静,等. 土与结构相互作用的可视化剪切试验装置研制及应用[J]. 岩石力学与工程学报, 2012,311:180-188. LI Shao-jun, MENG Fan-zhen, CHEN Jing, et al. Development of shear test device with interface visualization for soil-structure interaction and its application[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 311
[6] 徐 超,廖星樾,叶观宝,等. 土工合成材料界面摩擦特性的室内剪切试验研究[J]. 岩土力学, 2008,295:1285-1289. XU Chao, LIAO Xing-yue, YE Guan-bao, et al. Research on interface frictional characteristics of geosynthetics by laboratory shear tests[J]. Rock and Soil Mechanics, 2008, 295
[7] 汤 飞,李广信,金 焱,等. 单向塑料土工格栅与土界面作用特性的试验研究[J]. 水力发电学报, 2006,256:67-72. TANG Fei, LI Guang-xin, JIN Yan, et al. Experimental study on the interaction characteristics between single direction plastic geogrid and soil[J]. Journal of Hydroelectric Engineering, 2006, 256
[8] 徐 超,孟凡祥. 剪切速率和材料特性对筋-土界面抗剪强度的影响[J]. 岩土力学, 2010,3110:3101-3106. XU Chao, MENG Fan-xiang.
Effects of shear rate and material properties on shear strength of geosynthetic-soil interface[J]. Rock and Soil Mechanics, 2010, 3110: 3101-3106. (in Chinese)
[9] 张大勇,刘 博,刘红军. 土工格栅加筋界面摩擦特性及界面参数的确定[J]. 东北林业大学学报, 2011,398:137-139. ZHANG Da-yong, LIU Bo, LIU Hong-jun.
Reinforcement interface friction characteristics and interface parameter of geogrid[J]. Journal of Northeast Forestry University, 2011, 398: 137-139. (in Chinese)
[10] 杨广庆,隋传毅. 土工格栅与土体界面摩擦特性试验研究[J]. 石家庄铁道大学学报自然科学版, 2010,232:46-52. YANG Guang-qing, SUI Chuan-yi.
Experimental research on interface friction characteristics of geogrids and soil[J]. Journal of Shijiazhuang Tiedao University Natural Science, 2010, 232: 46-52. (in Chinese)
[11] 徐 超,李志斌. 针刺GCL内部剪切强度的试验研究[J]. 同济大学学报 自然科学版, 2010,385:639-644. XU Chao, LI Zhi-bin.
Experimental research on internal shear strength of needle-punched GCL[J]. Journal of Tongji University Natural Science, 2010, 385: 639-644. (in Chinese)
[12] KOERNER R M, SOONG T Y. Stability assessment of ten large landfill failures. advances in transportation and geoenvironmental systems using geosynthetics[C]// Proceedings of Sessions of GeoDenver 2000, ASCE Geotechnical Special Publication GSP No. 103: 1-38.
[13] QIAN X, KOERNER R. M. A new method to analyze and design against, translational failures of geosynthetic lined landfills[C]// Geosynthetics and Geosynthetic-Engineered Structures,LING H I, KALIAKIN V N, LESHCHINSKY D, ed. The ASME/ASCE/SES McMat Conference, Baton Rouge, Louisiana, 2005:61-98.
[14] QIAN X, KOERNER R M. Stability analysis for using engineered berm to increase landfill space[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009,1358:1082-1091.
[15] 施建勇,钱学德,朱月兵. 垃圾填埋场复合衬垫剪切特性单剪试验研究[J]. 岩土力学, 2010,314:1112-1117. SHI Jian-yong, QIAN Xue-de, ZHU Yue-bing.
Shearing behavior of landfill composite liner by simple shear test[J]. Rock and Soil Mechanics, 2010, 314: 1112-1117. (in Chinese)
[16] 钱学德,施建勇,刘 慧,等. 垃圾填埋场多层复合衬垫的破坏面特征[J]. 岩土工程学报, 2011,336:840-845. QIAN Xue-de, SHI Jian-yong, LIU Hui, et al. Failure interface behavior of multilayer landfill liner system[J]. Chinese Journal of Geotechnical Engineering, 2011, 336
[17] 徐志伟,周国庆. 直剪试验的面积校正方法及误差分析[J]. 中国矿业大学学报, 2007,365:658-662. XU Zhi-wei, ZHOU Guo-qing.
Correcting method and error analysis for sample area in direct shear test[J]. Journal of China University of Mining & Technology, 2007, 365: 658-662. (in Chinese)
[18] 詹金林,雷国辉,施建勇,等. 有效剪切面积对直剪试验结果的影响分析[J]. 河海大学学报自然科学版, 2007,352:213-216. ZHAN Jin-lin, LEI Guo-hui, SHI Jian-yong, et al. Effect of effective shearing area on result of direct shear tests[J]. Journal of Hohai University Natural Sciences, 2007, 352
[19] SL237—1999 土工试验规程[S]. 北京: 中国水利水电出版社, 1999. SL237—1999 Test guide of soil[S]. Beijing: China Water Power Express, 1999.(in Chinese)
[20] FILZ G M, ESTERHUIZEN J J B, DUNCAN J M. Progressive failure of lined waste impoundments[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2001,12710:841-848.
|
|
|
|
