|
|
|
| Determination of Anisotropic Factors of Pyrolytic Carbon by Electron Diffraction |
| ZHANG Jian-hui, ZHA Xiao, SUN Hai-bo |
| School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China |
|
|
|
|
Abstract The preferred orientation of pyrolytic carbon coating is an important performance parameter for the safe use of artificial mechanical heart valve.In this paper, the selected area electron diffraction (SAED) analysis of pyrolytic carbon coating samples of artificial heart valve was carried out by transmission electron microscopy (TEM), and the experimental method of characterizing the preferred orientation of pyrolytic carbon by electron diffraction spectrum, namely bacon anisotropy factor (BAF), was described, and the orientation angle and BAF corresponding to the electron diffraction spectrum were measured.The results show that the BAF value can directly reflect the anisotropy of pyrolytic carbon in the selected area. The BAF value range is from 1 to infinity, and the higher the preferred orientation is, the greater the value is. The BAF value decreases exponentially with the increase of orientation angle. When the pyrolytic carbon tends to be isotropic, the orientation angle tends to 180 and the BAF value tends to 1.
|
|
Received: 12 January 2021
|
|
Corresponding Authors:
ZHANG Jian-hui. E-mail: zhangjh@hdu.edu.cn
|
|
|
|
[1] Ahmad KA, Ahmad FA, Balendu CV, et al. Prosthetic heart valves: Types and echocardiographic evaluation[J]. International Journal of Cardiology, 2007, 122(2): 99-110.
[2] Zhang JH, Sun HB, Wang GM, et al. Determination of the preferred orientation degree of pyrolytic charcoal of artificial mechanical heart valve by selected area electron diffraction method[J]. Journal of Central South University (Natural Science Edition), 2013, 44(03): 1006-1010.
[3] Gao SB, Hou Y.Determination of BAF for the preferred orientation degree of carbon materials[J]. Aerospace Materials Technology, 1982 (03): 1-7.
[4] Bacon GE.A method for determining the degree of orientation of graphite[J]. Journal of Applied Chemistry, 1956, 6: 477-481.
[5] Bokros JC.Absorption factors for a modified bacon preferred-orientation technique[J]. Pergamon, 1965, 3(2): 167-174.
[6] Zhang C, Li JH.Determination of anisotropy factor of pyrolytic graphite by visible light double reflection method[J]. Journal of Tsinghua Universitly (Natural Science Edition), 1998, 38(07): 15-17.
[7] Tassone G.Bacon anisotropy factor measurements on PyC by X-ray diffractometry[J]. Carbon, 1970, 8(3): 387-388.
[8] Meadows PJ, Lopez-Honorato E, Xiao P.Fluidized bed chemical vapor deposition of pyrolytic carbon-II Effect of deposition conditions on anisotropy[J]. Carbon, 2009, 47(1): 251-262.
[9] Campbell AA, Campbell KB, Was GS. A methodology for quantitative determination of anisotropy of pyrolytic carbon[J]. Transactions of the American Nuclear Society, 2010, 102: 843-844.
[10] Zhang WG.Chemical vapor deposition-From the hydrocarbon gas to solid carbon [M]. Beijing: Science Press, 2007: 176-179.
[11] Meng QC.Transmission electron microscopy[J]. Harbin: Harbin Institute of Technology Press, 1998: 37-38.
[12] Zhang JH, Wang GM.Pyrolytic charcoal for artificial mechanical heart valves [M]. Beijing: Science Press, 2016: 42-47.
[13] Ely JL, Emken MR, Accuntius JA, et al. Pure pyrolytic carbon: preparation and properties of a new material, On-X carbon for mechanical heart valve prostheses[J]. J Heart Valve Dis, 1998, 7(6): 626-632. |
|
|
|
